User manual

Chapter 5: Server Management
150 Cobalt RaQ XTR User Manual
Time
You can configure the correct time, date and time zone for the RaQ XTR.
1. Select Server Management > Control Panel > Time. The “Time Settings”
table appears. See Figure 68.
2. Select the time and date with the pull-down menus.
3. Select the correct time zone by clicking in the Region, Country and Locale/
Zone fields.
4. As an option, you can also specify the name of a Network Time Protocol
(NTP) server with which the RaQ XTR server will synchronize its internal
clock every night. Enter the host name or IP address of the NTP server.
You can find a list of publicly available NTP servers at:
http://www.eecis.udel.edu/~mills/ntp/servers.html.
5. Click Save Changes.
Figure 68 shows the “Time Settings” table.
Figure 68. Time Settings table