User manual

Control panel
Cobalt RaQ XTR User Manual 147
Bandwidth Limits table
When you select the bandwidth-limit option, the “Bandwidth Limits” table
appears; see Figure 66.
If you have not applied a bandwidth limit to any IP addresses, the table is blank.
If you have applied a bandwidth limit to an IP address, the table displays four
columns:
• the IP address to which the limit is applied
• the bandwidth limit (in kb/s)
• the fully qualified domain name(s) of the site(s) associated with the
IP address
• the icons to modify the bandwidth limit (green pencil) or delete the
bandwidth limit (red trashcan)
Figure 66 shows the “Bandwidth Limits” table.
Figure 66. Bandwidth Limits table