User manual

Chapter 5: Server Management
146 Cobalt RaQ XTR User Manual
Figure 65 shows the settings tables of the Network section.
Figure 65. Settings tables in the Network section
Bandwidth
The RaQ XTR allows you to set an output bandwidth limit for each IP address
that you assign on a RaQ XTR server. The bandwidth limit applies to all of the
name-based virtual sites associated with an IP address.
The limit is specified in kilobits per second (kb/s), and the RaQ XTR enforces a
minimum bandwidth limit of 10 kb/s.
The bandwidth limit applies to all outgoing Transmission Control Protocol (TCP)
traffic on a particular IP address. This includes Web, FTP, POP and telnet traffic,
as well any other TCP-based application.
If multiple users are accessing a bandwidth-limited IP address, the system
divides the bandwidth evenly among the users.
If multiple named-based virtual sites belong to one IP address, the bandwidth
assigned to the IP address is divided evenly among the total number of users on
those name-based virtual sites.
You can apply a bandwidth limit to an IP address that did not previously have
one, modify an existing bandwidth limit or delete a bandwidth limit.
✍
Note: The Bandwidth feature does not regulate input traffic.