User manual

ii
4. Power Cord
!
Caution: The power supply cord is used as the main disconnect
device. Ensure that the socket-outlet is located/installed near the
equipment and is easily accessible.
!
Attention:Le cordon d’alimentation est utilisé comme interrupteur
général. La prise de courant doit être située or installée a proximité du
matérial et être facile d’accés.
!
Achtung: Zur sicheren Trennung des Gerätes vom Netz ist der
Netzstecker zu ziehen. Vergewissern Sie sich, daß die Steckdose leicht
zugänglich ist.
5. Electrical Shock
To reduce the risk of electrical shock, do not disassemble this product. Instead, take it to a
qualified service person when service or repair work is required. Opening or removing
covers may expose you to dangerous voltage or other risks. Incorrect reassembly can cause
electric shock when this product is subsequently used.
6. Operating the unit in an equipment rack
If you plan to operate the CacheRaQ in an equipment rack, take the following precautions:
(a) Make sure the ambient temperature around the CacheRaQ (which may be higher than
the room temperature) is within the limits specified in Appendix B.
(b) Make sure there is sufficient air flow around the unit.
(c) Make sure electrical circuits aren’t overloaded — consider the nameplate ratings of all
the connected equipment, and make sure you have overcurrent protection.
(d) Make sure the equipment is properly grounded — particularly any equipment
connected to a power strip.
(e) Don’t place any objects on top of the CacheRaQ.
Browsers
Both Netscape Navigator® and Microsoft® Internet Explorer have bugs that can cause
intermittent, unexplained failures. When using a web browser to interact with your
CacheRaQ, you may occasionally experience a browser failure. Released product versions of
the browsers are usually more reliable than beta versions, and later versions seem to work