User manual

Appendix A

To reset the CacheRaQ to a factory-fresh network state,

perform the following steps:

1. From the LCD console, hold down the button for

approximately 2 seconds.

The LCD screen will display:

SELECT:

SETUP NETWORK

2. Press the button three times until

RESET NETWORK appears in the LCD display:

SELECT:

RESET NETWORK

3. Press the button.

4. Using the control keys, toggle the cursor between

[Y]ES and [N]O and select [Y]ES to reset the

network conﬁguration.

5. Press when the cursor highlights [Y]ES.

After resetting, the CacheRaQ powers down and the

LCD displays:

PLEASE SWITCH

POWER OFF NOW

Resetting the Admin Password

If you forget the Administrator password, here’s how to

reset it:

1. Push a paper clip into the Reset Admin Password

port (to the right of the LCD screen on the front

panel) and hold for approximately 2 seconds. The

LCD screen displays RESETTING ADMIN PASSWORD.

Caution: After you’ve cleared the password, be sure to set

a new one as soon as possible (as described below) to pre-

vent unauthorized access to the Administrator functions.

2. In your Web browser, enter the URL

http://IP address/