User manual

Appendix A
28
The LCD screen displays:
SELECT:
SETUP NETWORK
2. Press the button.
3. Enter the Network 1 IP address, and then press the
button.
4. Enter the netmask for Network 1, and then press the
button.
5. Toggle the cursor to [S]ave or [C]ancel and press the
button.
If you select Cancel, you see the prompt to enter the
IP address (return to step 3, above). If you select Save
(and the netmask is valid), you see the prompt to
enter the Gateway.
6. Enter the Gateway, and press the button.
7. Toggle the cursor to [S]ave or [C]ancel and press the
button.
When you’re finished, choose
EXIT to leave the LCD
menu.
Rebooting
To reboot the CacheRaQ:
1. From the LCD console, hold down the button for
approximately 2 seconds.
The LCD screen displays:
SELECT:
SETUP NETWORK
2. Press the button once until REBOOT appears in the
LCD display:
SELECT:
REBOOT
3. Press the button.
4. Using the control keys, toggle the cursor between
[Y]ES and [N]O and select [Y]ES to reboot the
system.
5. Press again to accept [Y]ES.
E
E
E
E
E
E
S
S
E
E