User manual

Setting Up the Cobalt CacheRaQ
15
The sixth setting, Disk Space for Usage Statistics, controls how
much disk space to devote to the per-client and per-server usage
information that’s calculated nightly. (These statistics are
described in more detail in the next chapter.)
Click NEXT to move to the next Setup Wizard screen.
2. Network Integration
The Network Integration screen allows you to configure
network-related settings that aren’t configured via the LCD
interface, including:
• Hostname
• Domain name
• Primary DNS server address
• Secondary DNS server address
• Network 2 IP address
• Network 2 Netmask
The Hostname, Domain name, and Primary DNS Server Address
must be entered. If you are not the network administrator, you
can obtain the correct values for these fields from your network
administrator. You can also configure the Network 2 IP address
and netmask, if your configuration requires the use of this
interface. Finally, you can configure the Gateway address.
An optional CacheRaQ feature is to run a local caching-only DNS
server. If you enter 127.0.0.1 as the IP address of the Primay DNS
Server, the local caching-only DNS server will be enabled. You
may wish to run the local DNS server if, for example, your
normal DNS server is not in close network proximity to your
CacheRaQ.
For informational purposes, the Network Integration page
displays the Ethernet (MAC) addresses of your network
interfaces.
When you’ve entered the required information on the Network
Integration page, click
NEXT to move to the next screen.
3. Administrator Setup
The CacheRaQ has an Administrator user for performing normal
administrative and maintenance tasks. These tasks are performed
via the Web interface. You must authenticate yourself as user
admin before you can access the administrative functions.