User manual

Chapter 2
10
!
Caution: It is important to follow the proper power-down
procedure before turning off the CacheRaQ. Refer to “Powering
Down” in Appendix A.
Using the LCD Console During Setup
During startup, the LCD console displays status information
relating to the boot process itself. During setup, the console
buttons are used to enter network configuration information for
the CacheRaQ. After setup, the LCD console is used to change
network configuration information, to reboot, and to power
down the system.
The LCD screen displays two lines. The top line of the LCD
presents instructions regarding data to enter, and the bottom line
displays the data already entered. You use the control buttons to
the right of the LCD screen to enter the required network
information manually.
Here’s how the control buttons work:
The
Left button moves the cursor left.
The
Right button moves the cursor right.
The Up button increments the digit located at the cursor
position.
The Down button decrements the digit located at the
cursor position.
The S button (“select”) selects the next option.
LCD Screen
Control Buttons
S