User manual

Chapter 2
8
If you use Traditional Proxy mode, the HTTP and FTP proxy port
numbers for browser configuration are both 3128 by default (they
can be changed as described later in this chapter). Alternatively,
you can configure the browsers to use the CacheRaQ’s Proxy
Auto-Configuration (PAC) file; the URL for this file is http://
cacheraq-name /proxy.pac .
Example network configurations appear in Appendix C,
"Example Network Topologies," and detailed information is
available at the Cobalt Networks Web page
(www.cobaltnet.com).
Phase 1: Making the Connection
Installing the Cobalt CacheRaQ
The CacheRaQ can either be placed on a flat surface — for
example, a desk, shelf, or table top — or it can be connected to an
equipment rack.
!
Caution: If you operate the CacheRaQ in an equipment rack,
see the precautions described in “Operating the unit in an
equipment rack,” on page ii.
If you plan to use the CacheRaQ on a flat surface, attach the
rubber feet to the five indentations on the bottom of the case (as
shown in the following figure).
Rubber feet