User manual

Chapter 1
4
Chapter 3, “Cobalt CacheRaQ Administration,” describes how to
configure various features of the CacheRaQ and how to view the
statistics and log files.
Appendix A, “Using the LCD Console,” describes how to use the
CacheRaQ’s LCD console functions — configuring (and
resetting) the CacheRaQ’s network settings, rebooting, and
powering down.
Appendix B, “Product Specifications,” contains the product
specifications and functional information.
Appendix C, “Example Network Topologies,” shows examples of
how the CacheRaQ can be used within a network.
Requirements
• The CacheRaQ operates in a TCP/IP network on 10Base-T or
100Base-T Ethernet.
• The CacheRaQ’s administrative interface requires a Web
browser that supports frames and JavaScript™; Netscape
Navigator or Microsoft Internet Explorer, versions 3.0 or
later, will work.
• You need to assign or obtain an IP address and netmask for
each configured Ethernet interface. You also need to have a
gateway IP address and the IP address of a DNS server. To
use Transparent Caching, you should either be, or work
closely with, your network administrator to perform the
appropriate setup procedure, as described in Chapter 2,
“Setting Up the Cobalt CacheRaQ.”
Other Information
For the latest information, or if you have any unanswered
questions, visit the support section of the Cobalt Web site at
http://www.cobaltnet.com/support/. There, you can view a list
of FAQs (Frequently Asked Questions).
For General Cobalt Information
In the U.S.A. , call (888) 70-COBALT or [phone], or send e-
mail to [e-mail].
Outside the U.S.A. , call [phone], or send e-mail to
[e-mail].
In Europe , call [phone], or send e-mail to
[e-mail].