User manual

Introduction
3
Back View
• The Serial Connector allows for serial console connection.
• The Cooling Fan maintains proper thermal parameters.
• The Network 1 interface accepts a 10Base-T or 100Base-TX
Ethernet cable.
• The Network 2 interface accepts a 10Base-T or 100Base-TX
Ethernet cable. Use of this interface is optional, as described
in the next chapter.
• The Network Status Indicators signal network activity and
information.
• The OK to Power Off light indicates when the CacheRaQ is
ready to be powered down.
• The Power Switch toggles the power on or off.
• The Power Socket is where you attach the AC cord that’s
provided.
How to Use This Guide
This guide describes how to configure and operate the
CacheRaQ. You should be familiar with TCP/IP networking
concepts and know how to use either the Netscape Navigator®
or the Microsoft® Internet Explorer Web browser.
Organization of This Guide
Chapter 1, “Introduction,” includes an overview of the
CacheRaQ’s features and describes this guide.
Chapter 2, “Setting Up the Cobalt CacheRaQ,” explains
installation and configuration.
Serial
100 - 240 VAC 50/60 Hz
1.0 A 40W max
Tx/Rx
Link
100 M
Col
OK to
Power Off
Cobalt Networks and Cobalt CacheRaQ
are trademarks of Cobalt Networks, Inc.
S/N PPPPPMYWWSSSS
R15 664 NCU
CacheRaQ
Network 1
www.cobaltnet.com
Tx/Rx
Link
100 M
Col
Network 2
Serial
Connector
Cooling
Fan
OK to
Power Off
Network 1
Connector
Power
Socket
Network
Status
Indicators
Power
Switch
Network 2
Connector