User manual

Maintenance
Cobalt RaQ 4 User Manual 85
Suspend a virtual site
There are two ways to suspend a virtual site on the RaQ 4: a hard suspension and
a soft suspension.
For more information on soft suspensions, see “Suspend a virtual site” on
page 115.
Hard suspension
A hard suspension occurs when a storage device is disabled through the UI or is
disconnected from the RaQ 4. In this case, all virtual sites on that storage device
are inaccessible. You cannot administer these sites, and users cannot receive
email.
To disable an attached storage device:
1. On the Server Management screen, click Maintenance on the left. The File
Backup table appears.
2. Click Storage at the top. The Storage in Use table appears.
3. Click the green pencil icon next to the disk you want to disable.
4. Click the Enable disk check box so that it is de-selected.
5. Click Confirm Modify. The browser returns to the previous screen.
Reboot
Rebooting the RaQ 4 sometimes cures problems with certain services. The
Active Monitor software recommends when a reboot is necessary.
To reboot the RaQ 4 through your browser:
1. On the Server Management screen, click Maintenance on the left. The File
Backup table appears.
2. Click Reboot at the top. The Reboot Cobalt Server table appears.
3. A warning appears that rebooting the Cobalt server will make it unavailable
to the network for a while.
Click Reboot.
You can also reboot the RaQ 4 through its LCD console; refer to “Rebooting” on
page 154.
The reboot process can take a few minutes.