User manual

Control panel
Cobalt RaQ 4 User Manual 69
Deleting a bandwidth limit
To delete a bandwidth limit to an IP address:
1. On the Server Management screen, click Control Panel on the left. The
Service Settings table appears.
2. Click Bandwidth at the top. The Bandwidth Limits table appears.
3. In the table, locate the IP address for which you want to delete the bandwidth
limit.
4. Click the brown trashcan icon next to that IP address. A confirmation dialog
appears.
5. Click OK. The screen refreshes and the Bandwidth Limits table is displayed;
bandwidth limit for that IP address is removed.
Time
The RaQ 4 Administrator can configure the correct time and date and the time
zone for the RaQ 4.
1. On the Server Management screen, click Control Panel on the left. The
Service Settings table appears.
2. Click Time at the top. The Time Settings table appears. See Figure 28.
3. Select the time and date with the pull-down menus.
4. Select the correct time zone by clicking in the Region, Country and Locale/
Zone fields.
5. As an option, you can also specify the name of a Network Time Protocol
(NTP) server with which the RaQ 4 will synchronize its internal clock every
night. Enter the host name or IP address of the NTP server.
You can find a list of publicly available NTP servers at:
http://www.eecis.udel.edu/~mills/ntp/servers.html.
6. Click Save Changes.