User manual

Chapter 3: RaQ 4 Server Management
68 Cobalt RaQ 4 User Manual
Figure 27 shows the Add Bandwidth Limit table.
Figure 27. Add Bandwidth Limit table
Modifying a bandwidth limit
To modify a bandwidth limit to an IP address:
1. On the Server Management screen, click Control Panel on the left. The
Service Settings table appears.
2. Click Bandwidth at the top. The Bandwidth Limits table appears.
3. In the table, locate the IP address for which you want to modify the
bandwidth limit.
4. Click the green pencil icon next to that IP address. The Modify Bandwidth
Limit table appears. The first row of the table displays the IP address.
5. In the second row, enter the new value of the bandwidth limit in Kb/s. The
minimum value is 10 Kb/s.
6. Click Save Changes. The screen refreshes and the Bandwidth Limits table is
displayed with the new bandwidth limit for that IP address.