User manual

Chapter 3: RaQ 4 Server Management
66 Cobalt RaQ 4 User Manual
Bandwidth Limits table
When you select the bandwidth-limit option, the Bandwidth Limits table appears;
see Figure 26. If you have not applied a bandwidth limit to any IP addresses, the
table is blank. If you have applied a bandwidth limit to an IP address, the table
displays four columns:
• the IP address to which the limit is applied
• the bandwidth limit (in Kb/s)
• the fully qualified domain names of the sites associated with the IP address
• the icons to modify the bandwidth limit (green pencil) or delete the
bandwidth limit (brown trashcan)
Figure 26 shows the Bandwidth Limits table.
Figure 26. Bandwidth Limits table