User manual

Chapter 3: RaQ 4 Server Management
64 Cobalt RaQ 4 User Manual
Network
The network settings make the RaQ 4 visible to other computers. If you change
the IP address, the RaQ 4 reboots.
To enter or change the network configuration for the RaQ 4:
1. On the Server Management screen, click Control Panel on the left. The
Service Settings table appears.
2. Click Network at the top. The settings tables for the network configuration
appear.
3. Enter configuration information for the General Settings, the Interface
Settings for Network 1 or the Interface Settings for Network 2.
4. Click Save Changes.
Figure 25 shows the Settings tables of the Network section.
☞
Important: Coordinate the network configuration information with
your network administrator to ensure the integrity of your network.
Incorrect network settings can result in a loss of connectivity.
✍
Note: For help with a particular field, move the mouse pointer over
the Active Assist icon adjacent to the field. Help text appears in
a window at the bottom of the screen.