User manual

Control panel
Cobalt RaQ 4 User Manual 61
Arkeia file backup
You can use the Arkeia backup software from Knox Software to support backup
and restore needs on the RaQ 4.
There is a client component and a server component to the Arkeia backup
software. The client-side software is pre-installed on the RaQ 4. The server-side
software can be obtained from the Arkeia Web site at http://www.arkeia.com.
To enable or disable the Arkeia client-side backup software:
1. On the Server Management screen, click Control Panel. The Service
Settings table appears.
2. Click the check box next to Arkeia File Backup to on or off.
3. If you are disabling the Arkeia File Backup option, click Save Changes.
If you are enabling the Arkeia File Backup option, click on the Parameters
link next to the option in the Service Settings table. The Arkeia Parameters
table appears.
4. In the Arkeia Parameters table, enter the host name of the server that will
back up the RaQ 4.
5. Click Save Changes in the Arkeia Parameters table.
6. Click Save Changes in the Service Settings table.
Figure 23 shows the Arkeia Parameters table.
Figure 23. Arkeia Parameters table