User manual

Site management
Cobalt RaQ 4 User Manual 47
Modifying the default site settings
To modify the default settings for a virtual site:
1. On the Server Management screen, click Site Management. The Virtual
Site List table appears.
2. Click Set Virtual Site Defaults. The Virtual Site Defaults table appears.
3. Enter the information for the site.
4. See the descriptions in “Overview of virtual sites” on page 41.
5. Click Save Changes.
Once you have configured the default settings, you can modify the settings for
each virtual site that you add.
Adding a virtual site
To add a virtual site:
1. On the Server Management screen, click Site Management. The Virtual
Site List table appears.
2. Click Add Virtual Site. The Add New Virtual Site table appears. See
Figure 17.
3. Enter the information for the site (information from the virtual site default
settings is displayed here).
4. Make changes to the information or complete the necessary information.
5. Verify the settings and click Confirm New Site.
Figure 17 shows the screen for adding a virtual site.