User manual

Chapter 1: Introduction

6 Cobalt RaQ 4 User Manual

RaQ 4 requirements

To use the RaQ 4, you need:

• A 10BaseT, 10/100BaseTX or 100BaseTX Transmission Control Protocol/

Internet Protocol (TCP/IP) -based local area network (LAN).

• A personal computer (attached to the network) that uses a Web browser (for

example, Netscape Navigator, version 4.7 or later, or Microsoft Internet

Explorer, version 5.0 or later).

To manage the RaQ 4 from the user interface (UI), you must enable cookies,

cascading style sheets and Javascript on your browser (these features are

normally enabled by default).

• Network parameters, which you can obtain from your network

administrator; these include the IP address assigned to the RaQ 4, the subnet

mask of your network and a gateway or router address (if communicating

with other networks).

Target audience for the RaQ 4

The user manual is for RaQ 4 Administrators who use the RaQ 4 to develop and

host Web sites. RaQ 4 Administrators should be familiar with Microsoft®

Windows

, Macintosh® or other operating systems, and Netscape Navigator®,

Microsoft® Internet Explorer or other Web browsers.