User manual

Powering down

Cobalt RaQ 4 User Manual 155

Powering down

To power down the RaQ 4:

1. On the LCD console, hold down the button for approximately

2 seconds.

The LCD screen displays:

SELECT:

SETUP NETWORK

2. Press the button until

Power down

appears in the LCD screen:

SELECT:

POWER DOWN

3. Press the button.

4. Use the arrow buttons to toggle the cursor between [Y] and [N]. Select [Y] to

power down the system.

The

OK to Power Off

light on the back panel blinks. The LCD screen

displays:

PLEASE SWITCH

POWER OFF NOW

5. Toggle the

On/Off

switch on the back panel to the

Off

position.

Caution:

To prevent the potential loss of data, it is important to

follow the proper power-down procedure before turning off the

RaQ 4.