User manual

Chapter 4: Site Management
126 Cobalt RaQ 4 User Manual
Delete an SSL certificate
If for any reason you want to delete an SSL certificate for a virtual site, perform
the following steps.
1. Go to the Server Management screen.
2. Click the green wrench icon next to the virtual site on which you want to
delete the certificate. The Site Management screen appears.
3. Click SSL Settings on the left side.
4. Select Delete certificate from the pull-down menu at the bottom.
5. Click Save Changes.
The RaQ 4 processes the information and regenerates the screen; the
Certificate Request and Certificate windows are now blank.
Site Usage
The Site Usage feature allows the Site Administrator to monitor the amount of
bandwidth consumed by Web, email and FTP traffic generated by a virtual site as
well as disk usage for the virtual site.
For the Site Usage feature on the Server Management screen, see “Site Usage”
on page 88.
The reports are generated each night at 1:00 a.m and the statistics are updated
once daily for all services; the results are presented in tables.
Figure 49 shows a sample summary of disk usage on a virtual site.
!
Caution: If you delete the SSL certificate, you delete the private
key as well. If you delete the private key, you will need to purchase
a new SSL certificate from the external certification authority.
✍
Note: Deleting the certificate from the main site removes the
certificate from the virtual sites to which the certificate has been
propagated. In addition, it removes the secure connection to the
administration server (it reverts from https: to http:).