User manual

Chapter 4: Site Management
124 Cobalt RaQ 4 User Manual
Receive the response from the external
certification authority
The certification authority either sends you a certificate by email or returns the
information on the browser screen.
Enter the information from the external
certification authority
1. On the Site Management screen, click SSL Settings on the left side. The
“Certificate Subject Information” table appears.
2. Highlight and remove the information currently in the “Certificate” window.
3. On the Web site or in the email from the external certification authority,
highlight and copy the information received. (See “Receive the response
from the external certification authority” on page 124.)
4. Return to the RaQ 4 browser window and paste the new certificate
information that you copied in Step 3 into the “Certificate” window.
5. Select Use manually entered certificate from the pull-down menu at the
bottom.
6. Click Save Changes.
The browser screen refreshes and the externally signed certificate appears.
Figure 48 shows a sample of an externally signed certificate.
!
Caution: DO NOT choose Delete certificate from the pull-down
menu at the bottom. This action deletes your SSL certificate and
your private key, and you will then have to purchase a new SSL
certificate from the external certification authority.