User manual

Chapter 4: Site Management
104 Cobalt RaQ 4 User Manual
Changing user settings
Modify settings for a site user
To modify the settings for a site user (to change the name, password, disk
space allocation or telnet access for an existing user, to enable FrontPage
Web use or Secure POP3 [APOP], to make an existing user the Site
Administrator or to suspend a site user), click the green pencil icon.
1. On the Site Management screen, click User Management on the left. The
User List table appears.
2. Click the green pencil icon for the site user. The Modify User table appears.
See Figure 39.
3. Enter the changes in the Modify User table.
4. Click Confirm Modify .
Figure 39 shows the screen for modifying a site user.
Figure 39. Modifying a site user
✍
Note: The RaQ 4 supports long passwords through the UI. For
guidelines on choosing a password, see “Password guidelines” on
page 27.