User manual

Appendix A: Using the LCD Console
60 Cobalt CacheRaQ 4 User Manual
Resetting the CacheRaQ 4
Administrator password
If you forget the CacheRaQ 4 Administrator password, you can clear it by
following these steps.
1. Push and hold the end of a paper clip in the recessed Reset Password button
(located between the LCD screen and the LCD arrow buttons, on the front of
the CacheRaQ 4). Hold the button in for approximately two seconds.
The LCD screen displays:
Resetting admin
password...
2. Release the button.
3. In your Web browser, enter the URL http://<IP address>/admin/ or
http://<host name>/admin/ to access the CacheRaQ 4 UI.
4. If a prompt appears asking for a user name or password, enter “admin” as the
user name. DO NOT enter a password. Click OK.
5. Click Maintenance on the left. The Administrator Setting table appears.
6. Enter the password twice to ensure that you have entered it as intended. The
CacheRaQ 4 supports long passwords through the UI.
For guidelines on choosing a password, see “Password guidelines” on
page 27.
7. Click Save Changes.
☞
IMPORTANT: After you clear the password, enter a new one as
soon as possible to protect the security of the CacheRaQ 4. At this
point, anyone on the network can assign the CacheRaQ 4
Administrator password until you assign a new one.