User manual

Reset network

Cobalt CacheRaQ 4 User Manual 59

Reset network

The Reset Network function resets the host name, IP address, subnet mask,

gateway and DNS information to that of a new, unconﬁgured system. This

function is useful if you are moving the CacheRaQ 4 to a new network.

To reset the CacheRaQ 4 to a factory-fresh state:

1. On the LCD console, hold down the button for approximately two

seconds. The LCD screen displays:

SELECT:

SETUP NETWORK

2. Press the button until Reset network appears in the LCD screen:

SELECT:

RESET NETWORK

3. Press the button.

4. Use the arrow buttons to toggle the cursor between [Y] and [N]. Select [Y] to

reset the network conﬁguration.

5. Press the button.

After resetting, the CacheRaQ 4 powers down. The OK to Power Off light

on the back panel blinks. The LCD screen displays:

PLEASE SWITCH

POWER OFF NOW