User manual

Maintenance

Cobalt CacheRaQ 4 User Manual 51

Time Setup

This screen lets you set the time and time zone on the CacheRaQ 4.

It is important to set the time correctly, because the CacheRaQ 4 software rotates

the log ﬁles and generates the statistics shortly after midnight each day. This time

is chosen because it is close to the start of the day. This way, each day’s log ﬁles

and statistics accurately reﬂect the actual usage that occurred on the

corresponding calendar day.

1. Click Maintenance on the left. The Administrator Settings table appears.

2. Click Time at the top. The Time Settings table appears; see Figure 26.

3. Choose the correct settings from the pull-down menus on this screen.

4. As an option, you can also specify the name of a Network Time Protocol

(NTP) server with which the CacheRaQ 4 will synchronize its internal clock

every night. Enter the host name or IP address of the NTP server.

You can ﬁnd a list of publicly available NTP servers at:

http://www.eecis.udel.edu/~mills/ntp/servers.html.

5. Click Save Changes.

Figure 26. Time Setup screen