User manual

iv Cobalt CacheRaQ 4 User Manual
4. Power cord
5. Electrical shock
To reduce the risk of electrical shock, do not disassemble this product. Take
it to a qualified service person when service or repair work is required.
Opening or removing covers may expose you to dangerous voltage or other
risks. Incorrect reassembly can cause electric shock when this product is
subsequently used.
6. Operating the unit in an equipment rack
If you plan to operate the CacheRaQ 4 in an equipment rack, take the
following precautions:
a. Ensure the ambient temperature around the CacheRaQ 4 (which may be
higher than the room temperature) is within the limits specified in
Appendix B. See “Physical data” on page 64”.
b. Ensure there is sufficient air flow around the unit.
c. Ensure electrical circuits are not overloaded; consider the nameplate
ratings of all the connected equipment and ensure you have overcurrent
protection.
d. Ensure the equipment is properly grounded, particularly any equipment
connected to a power strip.
e. Do not place any objects on top of the CacheRaQ 4.
!
CAUTION: The power supply cord is used as the main disconnect
device. Ensure that the socket outlet is located or installed near the
equipment and is easily accessible.
!
ATTENTION: Le cordon d’alimentation sert d’interrupteur
général. La prise de courant doit être située ou installée à proximité
du matérial et offrir un accès facile.
!
ACHTUNG: Zur sicheren Trennung des Gerätes vom Netz ist der
Netzstecker zu ziehen. Vergewissern Sie sich, daß die Steckdose
leicht zugänglich ist.