Owner`s manual

Page 16 of 24 9301 Owner’s Manual •
••
• (V 2.1)
Software Build Number
A read only indication of the software build number. Software build number is an internal indicator
used by Cobalt engineers to differentiate different software builds.
Factory Default Settings
The factory default settings are as follows
1) The proc module is enabled, but all parameters are set to unity.
2) The audio mapping is for each AES input to be routed to its respective AES output, for example
AES IN 1 to AES OUT 1.
3) Audio gain is set to 0dB and polarity is set to normal on all channels.