Product manual

2 Setting Up 9341 Network Remote Control
2-6 9341 PRODUCT MANUAL 9341-OM (V4.1)
Setting Up 9341 Network Remote Control
Perform remote control setup in accordance with Cobalt
®
reference guide
“COMPASS™ Remote Control User Guide” (PN 9000RCS-RM).
Note: • If network remote control is to be used for the frame and the frame has not
yet been set up for remote control, Cobalt
®
reference guide “COMPASS™
Remote Control User Guide” (PN 9000RCS-RM) provides thorough informa-
tion and step-by-step instructions for setting up network remote control of
COMPASS™ cards using DashBoard™. (Cobalt
®
OGCP-9000/CC and
OGCP-9000 Remote Control Panel product manuals have complete instruc-
tions for setting up remote control using a Remote Control Panel.)
Download a copy of this manual by clicking on the DashBoard Control and
Monitoring link at www.cobaltdigital.com and then select DashBoard
Remote Control Manual as a download, or contact Cobalt
®
as listed in Con-
tact Cobalt Digital Inc. (p. 1-17).
• If installing a card in a frame already equipped for, and connected to
DashBoard™, no network setup is required for the card. The card will be dis-
covered by DashBoard™ and be ready for use.