Product manual

1 9084 Functional Description
1-10 9084 PRODUCT MANUAL 9084-OM (V4.5)
Note: Although the OGCP-9000 Remote Control Panel can be used with the 9084,
the OGCP-9000/CC Remote Control Panel is specifically designed for use
with 9084 cards and provides the most intuitive and simplest interface of all
the methods described.
9084 Rear I/O Modules
The 9084 physically interfaces to system video connections at the rear of its
frame using a Rear I/O Module. All inputs and outputs shown in the 9084
Functional Block Diagram (Figure 1-1) enter and exit the card via the card
edge backplane connector. The Rear I/O Module breaks out the 9084 card
edge connections to BNC connectors that interface with other components
and systems in the signal chain. These required BNC connections are
provided by either an 8310-BNC or 8310-C-BNC frame (which both have a
built-in BNC connector backplane module), or by using an optional 9084
Rear I/O Module.
Video Formats Supported by the 9084
Table 1-1 lists the video formats supported by the 9084.
Table 1-1 Supported Video Formats
Raster Structure Frame Rate
1080psF 23.98; 24
1080p 23.98; 24
1080i
(1)
25; 29.97; 30
720p 23.98; 24; 25; 29.97; 30; 50;
59.94; 60
486i
(1)
29.97
575i
(1)
25
(1) All rates displayed as frame rates; interlaced (“i”) field rates are two times the rate
value shown.