Product manual

9084-OM (V4.5) 9084 PRODUCT MANUAL 1-9
Introduction 9084 Functional Description
• Built-in Card Edge User Interface – Using the built-in card edge
controls and display, card control settings can be set using a front
panel menu which is described in Chapter 3,“Operating Instructions”.
Note: Some of the 9084 functions described in this manual are available only when
using the DashBoard™, or Cobalt
®
OGCP-9000 or OGCP-9000/CC Control
Panels user interfaces.
• DashBoard™ User Interface – Using DashBoard™, the 9064 and
other cards installed in openGear®
1
frames such as the Cobalt
®
HPF-9000 or 8321 Frame can be controlled from a computer and
monitor.
DashBoard™ allows users to view all frames on a network with
control and monitoring for all populated slots inside a frame. This
simplifies the setup and use of numerous modules in a large
installation and offers the ability to centralize monitoring. Cards
define their controllable parameters to DashBoard™, so the control
interface is always up to date.
The DashBoard™ software can be downloaded from the Cobalt
Digital Inc. website: www.cobaltdigital.com
(enter “DashBoard” in
the search window). The DashBoard™ user interface is described in
Chapter 3,“Operating Instructions”.
The DashBoard™ software can be downloaded from the Cobalt
Digital Inc. website: www.cobaltdigital.com
(enter “DashBoard” in
the search window). The DashBoard™ user interface is described in
Chapter 3,“Operating Instructions”.
Note: If network remote control is to be used for the frame and the frame has not yet
been set up for remote control, Cobalt
®
reference guide COMPASS™
Remote Control User Guide” (PN 9000RCS-RM) provides thorough infor-
mation and step-by-step instructions for setting up network remote control of
COMPASS™ cards using DashBoard™.
Download a copy of this guide by clicking on the Support>Reference
Documents link at www.cobaltdigital.com and then select DashBoard
Remote Control Setup Guide as a download, or contact Cobalt
®
as listed in
Contact Cobalt Digital Inc. (p. 1-15).
• Cobalt
®
OGCP-9000/CC and OGCP-9000 Remote Control
Panels – The OGCP-9000/CC and OGCP-9000 Remote Control
Panels conveniently and intuitively provide parameter monitor and
control of the 9084 and other video and audio processing terminal
equipment meeting the open-architecture Cobalt COMPASS™ cards
for openGear
®
standard.
The Remote Control Panels are totally compatible with the openGear
control software DashBoard™; any changes made with either system
are reflected on the other. The Remote Control Panel user interface is
described in Chapter 3,“Operating Instructions”.
1. openGear® is a registered trademark of Ross Video Limited. DashBoard™ is a trademark of Ross
Video Limited.