Owner`s manual

Page 18 of 23 9033 Owner’s Manual •
••
• (V 0.5)
Menu Item Parameters Description
Card Info
(Read-only)
SSN ############
Displays the Silicon Serial
Number of the card.
Enable
Group Enable
Disable
Enables or disables the
entire group of 4 channels.
Embedded 1-16
AES 1-16
Analog 1-8
Source
Silence
Chooses the source for the
embedded audio. The
source for each channel
can be chosen separately.
Gain Range (-999) - 300
Gain applied to embedded
audio output.
Normal
Embedded
Audio Group
(Groups 1-4)
Phase
Invert
Inverts the phase of the
embedded audio.
Parameter Save Confirm
Saves the parameters as
preset.
Parameter Load Confirm
Loads paramaters
previously saved.
Presets
Restart Parameters
to Factory Default
Confirm
Will load factory presets
and overwrite the save.
SDI
Input Video
Preference
Analog
This selects the preferred
input when both SDI and
analog are present.
Composite
Y/C
YPbPr BetaCam
YPbPr Mll
SD Input Type
YpbPr SMPTE
Selects the format of
input SD analog video, so
the decoder can properly
decode the signal.
GBR
HD Input Type
YpbPr
Selects the format of
input HD analog video.
Video Signal
Controls
SD Composite
Contains
0.0 or 7.5 IRE of Setup
Enables or disables setup
for SD.
On
Proc Controls
Enable
Off
Enables/Disables Proc
Video Gain Range 0-2000 Contrast
Video Lift Range (-999) – 999 Brightness
Color Gain Range 0-2000 Saturation
Video Proc
Color Phase Range (–360) - 360 Tint