Owner`s manual

9033 Owner’s Manual •
••
• (V 0.5) Page 15 of 23
Parameter Type Descriptions
Proc Enable
Enables the Proc module. You can keep all the proc settings, and enable/disable the module without
having to reset the set
Proc Gain
This is Luma (Y channel) gain, expressed as a percentage. It ranges from 0.0% to 200.0% in 0.1%
steps.
Proc Lift
This is Luma (Y channel) offset, expressed as an actual video value ranging from -1024 to 1024. If set
to 0 no change is made. If set to 1024 absolute black (value 004) becomes absolute white (value 3FB).
If set to –1024, absolute white becomes absolute black.
Proc Saturation
This is Chroma (C channel) gain, expressed as a percentage. It ranges from 0.0% to 200.0% in 0.1%
steps.
Proc Phase
This is Chroma (C channel) phase adjustment, expressed in degrees, ranging from –360 to +360 in
steps of one degree.
Decoder SD Input
Selects the input format for SD analog video. This must be changed to reflect the analog video format
on the input for the 9033 to lock correctly. Valid SD formats are GBR, Component SMPTE,
Component MII, Component Betacam, Component Y/C, and Composite.
Decoder HD Input
Selects the input format for HD analog video. The user must select between GBR and YPbPr for the
9033 to lock to the input correctly.
Pedestal - SD Setup
Selects between no setup and 7.5 IRE on the input analog SD signal. This tells the card how much
setup needs to be removed from the input.
Embedded Group Enable
Enables or disables the embedding of a particular embedded audio group. Disabling a group preserves
the settings of the channels belonging to that group.
Output Source
Because the cards audio system functions like a router, each embedded output can be sourced from any
input channel. This parameter let’s you choose from the many different sources. Here is an explanation
of the different source names:
Source Name Description
EmXX Input embedded audio channel XX (1 through 16)