Specifications

Project #2008377 VIDEO PRODUCTION SYSTEM
Section 11130 (or 27 41 30)
Page 19
Video Production Redesign FBC Highland Park
Landover, Indiana
10/07/2013
Coordinate finish with FOH audio racks.
Sound Construction & Supply R5-1-ST-14D-X-V rack NO slant (Qty: 1)
Middle Atlantic RK12 with RKW kit (Qty: 1)
Furman D10-PFP (Qty: 2)
2.19 Banquet Hall
Multi-purpose Room
Switcher
Extron IN1608 (Qty: 1)
Blu-Ray Player
Panasonic Available Model (Qty: 1)
Converter
AJA Hi5 (Qty: 1)
Twisted Pair
Crestron DM-TX-200-C-2G (Qty: 1)
Crestron DM-RMC-100-C (Qty: 1)
Extron DTP HDMI 230 RX (Qty: 1)
Projection (refer to 2.16.A.1-4 for specification details)
Barco RLM-W12 (Qty: 1)
Barco Lens TLD+ 1.25-1.6:1 Zoom Lens (Qty: 1)
Screen (refer to 2.17.A.1-3 for specification details)
Da-lite 12’W x 6.75’H Large Tensioned Advantage Deluxe Electrol Screen with Da-Matte front
projection material and Low Voltage Controller (Qty: 1)
2.20 WALL, FLOOR & RACK PANELS AND BOXES
Indoor A/V Junction Boxes shall be Hoffman Type-1 screw cover pull boxes as detailed in the drawing set
unless designated otherwise.
Outdoor A/V Junction Boxes shall be AFC Unifab A/V Enclosures as detailed in the drawing set unless
designated otherwise.
Floor Boxes shall be Ace Back Stage boxes as detailed in the drawing set unless designated otherwise.
J-Box Panels.
Panel to be mounted on/in boxes, enclosures and racks in locations shown on the drawings.
AV Contractor to confirm size of all panels required.
Panels mounted on standard ganged panels to be stainless steel ganged plates.
Panels to be no less than 1/8” thick unless otherwise noted.
Rack/Enclosure panels to be flanged to add extra strength.
Panels shall be black with engraved lettering filled with white paint. If floor mounted appropriate floor
covering shall be applied with attention to door mobility.
Contractor will submit panel engraving schedule and fabrication drawings for approval
Panels to contain components listed in Section 2.11.
Panels to be manufactured by one of the following manufactures: