Specifications

Project #2008377 VIDEO PRODUCTION SYSTEM
Section 11130 (or 27 41 30)
Page 16
Video Production Redesign FBC Highland Park
Landover, Indiana
10/07/2013
1. The Contractor shall insure that flexible, portable, field-grade cables are provided that feed from the
floor/wallbox to the camera head. No installation grade cables may be used outside of conduit.
2. AC Contractor to provide Camera cables with Neutrik OpticalCON Duo at box end, and Hitachi
compatible SMPTE Lemo connection at camera end.
a. 25’ (Qty: 2)
b. 50’ (Qty: 1)
2.15 MATV EQUIPMENT
A. Contractor shall supply and integrate taps and splitter selected for indoor installation, with a minimum
performance bandwidth of 1000Mhz. Components shall be Blonder Tongue or equal.
B. All RF components DOWNSTREAM of RFISO-102 shall be powered by Utility power, and if in rack, on ISO
tabs.
C. Contractor to determine, supply and install tap and amplification values based on site cable run lengths and
supply and install all splitters needed.
D. Transformers to be rack mounted on back of blank rack panel.
E. All devices must be physically isolated with appropriate iso tabs in rack.
F. Headend Equipment
1. Modulator
a. ZeeVee ZvPro620 (Qty: 1)
2. Combiner
a. Blonder Tongue HPC-8 (Qty: 1)
3. Splitter
a. Blonder Tongue SXRS-3 (Qty: 1)
4. Isolation Transformer
a. Jensen VRD-1FF (Qty: 2)
5. Amp/tap/splitter
a. As needed to make a balanced system
6. Converter
a. AJA V2ANALOG (Qty: 1)
7. Digital Signage
a. Apple Mac Mini with remote desktop software [POSSIBLE OFE] (Qty: 1)
b. Mini Displayport to VGA adaptor (Qty: 1)
G. Distributed Displays
1. Contractor shall coordinate locations for internal wall support for television mounts to G.C. per design.
2. Television Model numbers shown as a level of quality. Must have LED backlit technology (all), Less
than 2” deep (excludes 70”), 1920x1080 resolution (32” and larger), and RS232 Input (32” and larger).
3. Lobby and Distributed Displays
a. LG 42LN541C 42” HDTV (Qty: 4)
b. LG 55LA6900 55” HDTV (Qty: 1)
4. Mounts