Specifications

Project #2008377 VIDEO PRODUCTION SYSTEM
Section 11130 (or 27 41 30)
Page 11
Video Production Redesign FBC Highland Park
Landover, Indiana
10/07/2013
a. Rode NTG1 (Qty: 2)
b. Rode SM4 Mounts (Qty: 2)
3. DA
a. Rane DA 216S (Qty: 1)
4. Volume Control
a. SMPro Audio NanoPatch Plus (Qty: 1)
5. Speakers
a. Adam Audio A7X (Qty: 2)
6. Monitor
a. Fostex RM-2 (Qty: 1)
7. Isolator
a. Jensen JT-11P-1 (Qty: 2)
B. INTERCOM
1. Contractor will construct 1RU RPV-01, RPV-02, and RPV-03 per Video Panel Details.
2. Contractor to supply and install terminated XLR intercom cables (brown) to each device, including
loose beltpacks. Each Beltpack to receive a 20’ terminated intercom cable.
3. Contractor to supply and install Y cables and 6-pin extension cables per schematics for each 2
channel belt pack.
4. Contractor to verify all headset connectors to insure compatibility with Clear-Com systems when
connected to Clear-Com devices; insure compatibility for Hitachi connectors for camera headsets
supplying correct impedance microphones for camera use (CC-400 headsets).
5. Master Station
a. Clear-Com MS-704 (Qty: 1)
6. User Stations
a. Clear-Com RM-704 (Qty: 3)
b. Clear-Com RM-702 (Qty: 1)
7. Belt Packs
a. Clear-Com RS-601 (Qty: 3)
b. Clear-Com RS-602 (Qty: 1)
8. Accessories
a. Clear-Com GM-18 (Qty: 1)
b. Clear-Com IC25/6 25’ 6-pin wire – for RS-602 (Qty: 1)
c. Clear-Com YC-36 Y-Cables for RS-602 (Qty: 1)
9. Headsets
a. Clear-Com HS-6 Telephone Style (Qty: 2)
b. Clear-Com CC-26K-X4 (Qty: 5)
c. Clear-Com CC-300-X4 (Qty: 3)
d. Clear-Com CC-400-X5 (Qty: 3)
10. Interface
a. Clear-Com IF4W4 Camera Interface (Qty: 1)
11. Flasher
a. Clear-Com FL7 (Qty: 2)