Owner`s manual

9006 Owner’s Manual •
••
• (V 1.4) Page 11
Cable Connections
This section provides instructions for connecting cables to the installed BNC rear modules on the frame
backplane. Connect the input and output cables according to the following diagram. Split rear module
RM20-9006-B/S allow two cards to be installed in adjacent slots. B/S versions are available in
DIN1.0/2/3 and HDBNC versions.
RM20-9006-A RM20-9006-B/S
Note: Outputs OUT A1, OUT B2, OUT C1 and OUT C3 are inverting. These outputs are not
compatible with ASI video.
Figure 3. BNC Designations for 9006 Rear Modules