Owner`s manual

Page 12 9003 Owner’s Manual •
••
• (V 1.6)
Cable Connections
This section provides instructions for connecting cables to the 9003 rear modules. Connect the input
and output cables according to the following diagram. Split rear module RM20-9003-B/S allow two
cards to be installed in adjacent slots. B/S versions are available in DIN1.0/2/3 and HDBNC versions.
RM20-9003-A RM20-9003-B/S
Note: Outputs OUT A1, OUT A3 and OUT B2 and OUT B4 are inverting. These outputs are not
compatible with ASI video.
Figure 3. Connector Designations for the Card Rear Modules