Owner`s manual

Page 8 of 23 CDI-9321 User Manual •
••
• (V 0.5)
There is also a video proc module to allow any necessary corrections to the inbound video signal. It has
separate controls for Luma gain (Y channel), Saturation (C channel gain), Lift (Y channel offset), and
Phase adjustment (C channel).
Supported Audio and Video Formats
Input and Output Video
The 9321 supports a wide range of video formats for embedding. The output video rate is always
precisely the same as the input video rate. Video delay through the device is less than one microsecond.
Table 1. Supported Embedding
Video standard
1080 sF 23.98
1080 p 23.98
1080 sF 24
1080 p 24
1080 i 25
1080 p 25
1080 i 29.97
1080 p 29.97
1080 i 30
1080 p 30
720 p23.98
720 p24
720 p 25
720 p 29.97
720 p 30
720 p 50
720 p 59.94
720 p 60
486 i 29.97
575 i 25
Notes:
1. All rates translated to effective frame rates, interlaced rates “ i ” are two times the number shown.
For example, i 29.97 is 59.94 fields per second (two fields per frame thus the interlaced frame rate
is 29.97); but progressive “ p ” 29.97 is 29.97 frames per second.
2. SD active line rates are PAL (575) and NTSC (486).
Embedded Audio
The 9321 supports all four groups (16 channels) of embedded audio at full 24 bit resolution in both SD
(with extended data packets) and HD.