Owner`s manual
Page 16 of 23 CDI-9321 User Manual •
••
• (V 0.5)
Display Brightness
This parameter allows you to set the standard output brightness of the menu display. It is a percentage
of maximum brightness.
Save Settings
In this parameter, move the toggle switch up to save the settings to the card persistent storage.
Load Settings
In this parameter, move the toggle switch up to load the saved settings and make them active.
Restore Factory Settings
In this parameter, move the toggle switch up to make the factory default settings active, and make the
stored settings equal to the factory settings.
Factory Default Settings
The factory default settings are as follows
1) The proc module is enabled, but all parameters are set to not change the video
2) Discrete AES inputs 1-16 are mapped to embedded audio outputs 1-16.
3) Audio gain is set to 0dB and polarity is set to normal on all channels.