Owner`s manual
CDI-9321 User Manual •
••
• (V 0.5) Page 13 of 23
Card Control and Status
Card Status
The card indicates the status of the input signal with the four blue LEDs labled with the different
supported formats (1080, 720, 625, 525). When the card has locked to a particular input format, that
LED will be illuminated. When the card has not locked to a particular video format, the card will
search all possible formats, and the lights will cycle rapidly.
Menu Navigation
The card can be configured from a menu system built in to the front card edge. This provides an
intuitive and easy to use method for exploring and using the features of the card.
The menu is navigated by using the toggle switch and the two push buttons. The lower button is the
“Enter” button to enter a submenu, and the upper button is the “Exit” button to exit a submenu. Moving
the toggle switch up or down moves up or down in menu choices, and pressing the buttons moves in or
out of sub menus.
The menu LEDs will illuminate from top to bottom to indicate increasing depth in the menu.
Menu Structure
The entire 9321 menu looks like this:
MENU STRUCTURE Parameter Type
Enbl Proc Enable
Gain Proc Gain
Lift Proc Lift
Sat Proc Sat
Proc
Phas Proc Phase
Enbl Embedded Group Enable
Src Output Source
Gain Output Gain
Ch01
Pol Output Polarity
Src Output Source
Gain Output Gain
Ch02
Pol Output Polarity
Src Output Source
Gain Output Gain
Ch03
Pol Output Polarity
Src Output Source
Gain Output Gain
Grp1
Ch04
Pol Output Polarity
Enbl Embedded Group Enable
Src Output Source
Gain Output Gain
Ch05
Pol Output Polarity
Src Output Source
Gain Output Gain
Ch06
Pol Output Polarity
Src Output Source
Aud Embd
Grp2
Ch07
Gain Output Gain