Owner`s manual
9232 Owner’s Manual (V 1.1) 21
Table 3. 9232
Technical Specifications
Category Parameter Specification
Number of Inputs 1 (Looping*)
Input Impedance 75Ω terminating
Return Loss 43dB to 5MHz, 35dB to 20MHz
Analog Input
Nominal Signal Level 1Vpp (video, AES-3id)
Number Of Outputs 8
Output Impedance 75Ω
Output Return Loss 45dB to 5MHz, 41dB to 20MHz
Output Isolation 51dB to 5MHz, 40dB to 20MHz
DC Offset <30mV
Frequency Response ±0.08dB to 10MHz, ±0.2dB to 20MHz
Differential Phase
<0.1
˚ in NTSC, <0.3˚ in PAL
Differential Gain <0.1% in NTSC, <0.1% in PAL
Analog
Outputs
RMS Noise (unweighted) 68dB
Gain Range ±3dB
Gain Stability
<0.2% per 10
˚C
Delay
7ns (9
˚ @ 3.58MHz) NTSC
7ns (11
˚ @ 4.43MHz) PAL
Chrominance-to-Luminance Delay <2.0ns
Line Rate Window Tilt <0.1%
Field Rate Window Tile <0.1%
Performance
(all outputs
loaded)
Bandwidth -3dB @ 56MHz Typical
Power
Total Power Draw <1.5W
*Looping only available with the RM-9232-B Rear Module.
Specifications are subject to change without notice