User manual

SP-5000M-CXP2 / SP-5000C-CXP2

- 62 -

Notes:

1. If the exposure mode is OFF and the HDR mode is set to ON, the exposure mode is

automatically changed to Timed.

2. If horizontal binning and/or vertical binning are set to ON, the HDR mode cannot be set.

In this case, the HDR mode must be set first before H-Binning and/or V-Binning are set.

3. In this mode, exposure overlapped behavior is not available and the frame rate is slower than

the normal operation.

4. The exposure time value is fixed at the value when HDR Mode is activated. When the exposure

time is changed, HDR Mode should be off. Once the exposure time is changed, the HDR Mode

can be set to ON again.

5. In this mode, Exposure Auto function is disabled.

Fig. 39 HDR characteristics

Knee Slope

Dynamic Range [%]

(200)

(400)

(800)

(1600)

Associated GenICam register

GenICam

Name

Access

Values