User manual

SP-5000M-CXP2 / SP-5000C-CXP2
- 51 -
OFF: Adjust manually.
Once: Operate only one time when this command is set
Continuous: Operate the auto gain continuously
The following detailed settings are also available.
ALC Speed: The rate of adjustment of GainAuto can be set (Common with
ExposureAuto).
Gain Auto Max: The maximum value of GainAuto control range can be set
Gain Auto Min: The minimum value of GainAuto control range can be set
ALC Reference: The reference level of Gain Auto control can be set (Common
with ExposureAuto)
ALC channel area: The measurement area of GainAuto control can be set, either
entire area or individual section (Common with ExposureAuto)
Fig. 30 Channel area
8.2.5 Balance White Auto
This is a function to achieve auto white balance by using R and B gain.
There are three operations.
OFF: Manual operation
Once: Only when this operation is set, the auto white balance is executed.
Continuous: The auto white balance is continuously executed.
4600K/5600K/6500K: Preset color temperature setting
8.2.6 Associated GenICam register
GenICam Name
Access
Values
Category
Balance White Auto
(for Color)
R/W
Off
Once
Continuous
Preset4600K
Preset5600K
Preset6500K
Analog Control
Balance White
Channel Area ALL
R/W
Off
On
JAI-Custom
Balance White
Channel Area Low
Right
R/W
Off
On
JAI-Custom
Balance White
Channel Area Low
Middle Right
R/W
Off
On
JAI-Custom
Low
Right
Low
Mid-right
Low
Mid-left
Low
Left
Mid-Low
Mid-left
Mid-High
Mid-left
High
Mid-left
Mid-Low
Left
Mid-High
Left
High
Left
High
Mid-right
Mid-High
Mid-right
Mid-Low
Mid-right
High
Right
Mid-High
Right
Mid-
Low
Right