User manual

SP-5000M-CXP2 / SP-5000C-CXP2
- 50 -
Note2: If Analog Base Gain is set at 0dB and Digital Gain is used at high gain setting, the
video level may be unstable and fluctuating approx. 5%. In this case, it is suggested
to set the analog base gain at +6dB or +12dB.
The above drawing shows the relation among gain setting value (command), gain amplitude,
and dB indication. For example, the gain amplitude “x 3.16” equals 10dB.
Fig.29 Gain control
8.2.1 Gain Selector
The following parameters can be set.
SP-5000M-CXP2: DigitalAll
SP-5000C-CXP2: DigitalAll/Digital Red All/Digital Blue All
8.2.2 Gain
This is the reference value upon which gain adjustments are based. The operational adjustment is
done in Gain Raw.
SP-5000M-CXP2: DigitalAll：1～16 (0dB to +24dB)
SP-5000C-CXP2: DigitalAll：1～16 (0dB to +24dB)
Digital Red All：0.4466～5.6235
Digital Blue All：0.4466～5.6235
8.2.3 Gain Raw
The gain raw can be adjusted in the following range.
SP-5000M-CXP2: DigitalAll：100～1600
SP-5000C-CXP2: DigitalAll：100～1600
Digital Red All/Digital Blue All：-45～379
8.2.4 Gain Auto
This function automatically controls the gain level.
This is controlled by the command JAI ALC Reference.
There are three modes.
X89.12
X16
X7.15
X5.62
X1
X0.45
1600
0
Gain
Magnification
Gain Setting Value
(Magnification)
37846 (X5.62)
0 (X1)
-4523 (X0.45)
Gain
Setting
Value
Master
R&B
Master Red
Blue
Gain Control Range for Bayer Color
39dB
-7dB
0dB
24dB
15dB
0dB
-7dB
15dB
0dB
-7dB
15dB
37846 (X5.62)
0 (X1)
-4523 (X0.45)