User manual

SP-5000M-CXP2 / SP-5000C-CXP2
- 14 -
5.2 Connectors and pin assignment
5.2.1 Digital Video Output (75Ω 1.0・2.3 DIN Receptacle)
Type: CoaXPress Connector (ACX1785-ND Amphenol Connector or equivalent)
CXP#1
PoCXP compliant
CXP#2
Maximum Bit Rate per one coax: 6.25 Gbps
Maximum Bit Rate per two coax: 12.5 Gbps
Note: If one coaxial cable is used, CXP#1 must be used.
5.2.2 12-Pin connector
Type: HR-10A-10R-12PB(72) Hirose male or equivalent.
Table – 4 Hirose 12P pin assignment
*1) Factory default setting is an Exposure Active signal with negative polarity.
*2) Factory default setting is a trigger input
5.2.3 AUX Standard Hirose 10-Pin connector
5.2.3.1 Figure and pin configuration
Type : HIROSE 10-Pin Connector 3260-10S3(55)
Fig.5 Hirose 10-pin connector
Pin no.
Signal
Remarks
1
GND
2
DC input
+12V to +24V
3
GND
4
NC
5
Opto in-
Line5
6
Opto in+
7
Opto out-
Line2
8
Opto out+
9
TTL out
Line 1 (Note*1)
10
TTL in
Line 4 (Note*2)
11
DC input
+12V to +24V
12
GND
Fig.4 12-pin connector
1
8