User manual
SP-5000M-CXP2 / SP-5000C-CXP2
- 12 -
Pixel format in CoaXPress can be set to either 8-bit or 10-bit output. However, as shown in the chart
below, the 10-bit CoaXPress pixel format is not available (x) if the sensor is set to 8-bit pixel format.
Sensor Pixel Format
CXP 8-bit
CXP 10-bit
Sensor 8-bit
○
×
Sensor 10-bit
○
○
Sensor 12-bit
○
○
JAI recommends the following settings depending on applications.
If the objective is to maximize the frame rate:
The sensor pixel format should be set to a smaller value. However, if the sensor pixel format and the
CXP pixel format are set to the same bit depth, “gaps” or “breaks” may occur in the histogram gain when
is Example: applied. Sensor format is 8-bit and CXP format is 8-bit
If picture quality is the first priority:
The sensor pixel format should be set larger than that of the CXP pixel format.
Example: Sensor format is 12-bit and CXP format is 8-bit
The relationship between pixel format and maximum frame rate is determined as described in the
following table.
Table – 2(1) CoaxPress Interface (For Mono and Bayer)
Link
Configuration
Number
of lanes
PoCXP
(Note)
Sensor
8-bit
CXP 8bit
Sensor
10-bit
CXP 8bit
Sensor
10-bit
CXP 10bit
Sensor
12-bit
CXP 8bit
Sensor
12-bit
CXP 10bit
CXP-3x1
1
CXP#1
53 fps
42 fps
42 fps
35 fps
35 fps
CXP-3x2
2
CXP#1
106 fps
84 fps
84 fps
70 fps
70 fps
CXP6x1
1
CXP#1
CXP6x2
2
CXP#1
211 fps
169 fps
166 fps
141 fps
141 fps
Note: PoCXP is only available on CXP#1 connector.
Table – 2(2) CoaxPress Interface (For RGB 8-bit)
Link
Configuration
Number
of lanes
PoCXP
(Note)
Sensor
8-bit
CXP 8bit
Sensor
10-bit
CXP 8bit
Sensor
12-bit
CXP 8bit
CXP-3x1
1
CXP#1
11 fps
8 fps
7 fps
CXP-3x2
2
CXP#1
22 fps
17 fps
14 fps
CXP6x1
1
CXP#1
CXP6x2
2
CXP#1
44 fps
35 fps
29 fps
Note: PoCXP is only available on CXP#1 connector.










