User manual

SP-5000M-CXP2 / SP-5000C-CXP2
- 9 -
4. Locations and functions
4.1 Locations and functions
 Lens mount C-mount (Note *1)
 10-pin connector AUX Connector for lens control (Standard)
 LED Indication for power and trigger input
 12-pin connector DC and trigger input
 LINK 1 LINK Status indication for CXP#1
 LINK 2 LINK Status indication for CXP#2
 CXP#2 CoaXPress No.2 connector
 CXP#1 CoaXPress No.1 connector (Note*2)
 Mounting holes Holes for mounting tripod base or direct installation.
Depth 5 mm (Note*3)
*1) Note1: Rear protrusion on C-mount lens must be less than 10.0 mm.
*2) Note2: When one coaxial cable is used, CXP#1 must be used.
*3) Note3: The part number for the tripod adapter plate (with 1/4"-20 thread) is MP-42 (option).
Fig. 1 Locations