Assembly Guide

16PCS
14PCS
1PC
32PCS
10 FLAT HEAD SCREW
(4 x 15mm - SR)
12PCS
4PCS
11 CAM NUT
(Ø15 x 12mm - SR)
12 CAM BOLT
(Ø7.5 x 35mm - SR)
12PCS
12PCS
12PCS
1PC
14 ADAPTER PLUG
8 HINGE
(SR)
2PCS
9 HANDLE WITH SCREW
(148mm - NK,4x18mm - RBW)
1SET
4PCS
13 SHELF SUPPORT
(SR)
1 LONG BOLT
(Ø1/4'' x 50mm - RBW)
2 WOOD DOWEL
(Ø8 x 30 - NT)
3 ALLEN WRENCH
(4 x 57mm - RBW)
4 MEDIUM BOLT
(Ø1/4'' x 35mm - RBW)
5 SHORT BOLT
(Ø1/4'' x 30mm - RBW)
6 FLAT WASHER
(5/16'' x Ø19 - RBW)
7 LOCK WASHER
(Ø1/4'' - RBW)
28PCS
17PCS
15 PAN HEAD SCREW
(3
x 12mm - SR)
NOTE:
Phillips head screw driver is required in the assembly process; however, manufactures does not provide this item.
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the
store immediately.
2. This product is for home use only and not intended for commercial establishments.
WARNING!
HARDWARE IDENTIFICATION
COASTERFURNITURE.COM
PAGE 3 OF 10
1.Remove hardware from box and sort by size.
2.Please check to see that all hardware anf parts are present prior to start of assembly.
3.Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
Z-B2 (BOX 2) - HARDWARE PACK IS LOCATED IN 931149(B2)
ITEM
:
931149(B1&B2)