Assembly Instructions

Table Of Contents

PAGE 1
PAGE 2
ITEM:910077 ASSEMBLY INSTRUCTION ASSEMBLY INSTRUCTION ASSEMBLY TIPS: 1. Remove hardware from box and sot by see A Warning | Z Please check fo see hat all hearer and parts are present prior To start of assembly. 3. Please follow affianced instructions in the same sequence 8s numbered fo assure Bast & easy assembly, 4. Hoer attest to sepal or modify parts that are broken or defective. Please contact the stir Immediately. Z.
PAGE 3
ITEM:910077 ASSEMBLY INSTRUCTION Step 1 : Install four Long Tubes (E) to one Frame (B) with a Bolt Washer (4) between a tube and the frame, then fasten them with Long Bolts (3). Put the two Caps (5) on top of the Bolts on one side,and install the Handle (A) on the other side. Attach the four pad suckers (1) on each corner of the Frame Step 2 : On the other side of the four Tubes, install another Frame (B) with a Bolt Washer (4) and a Long Bolt (3) on each Tube.